3D Decals: Touch the pattern surface will have a strong stereo feeling and the thickness of the 3D is adjusted according to the customer’s requirement and the radian of the object. Because the three-dimensional parts of the imported ink, so after high temperature baking the surface hardness and gloss is very high ,don’t need clear coating, especially suitable for matte frame with gloss decals or directly used on anode frame.

Feature:

1. Super high adhesion, can use clear coating or non-coating, paint or non-paint.

2. After 3D, the substrate will have an extrusion effect after painting

3. 3D can be made in various thicknesses according to the design.

Method of use:

1.Clean the product surface.

2. Remove the release paper without film label, soak pure water for 10-20 seconds.

3. Remove the backing paper, use the squeegee scrape bubbles and moisture, until water discharge.

4. 80 ℃ -100 ℃ baking 20 minutes (carbon fiber objects, baking 85 ℃, 30 minutes)

5. 120-145 baking 20 minutes (carbon fiber objects baked 85 ℃, 20-30 minutes), can be sprayed or not spray gold oil in outside.

Among them, the thickness of our 3D decals can be selected in different heights according to different patterns.